Sublimation Hardboard MAGNET TRACK & FIELD USA MADE

• FRAME 5”x 3.7” approximately
• The print area is 4.375” x 3.125”
• Hardboard material made in the USA
• Magnet included
• REMOVE FILM TO EXPOSE CLEAN BLANK

Suggested Pressing Recipe

• Temperature: 375 F
• Time: 50 seconds
• Pressure: Light

NOTE:

• Remove the film before pressing.
• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• The substrate should be at room temperature.