Sublimation ROLLING / SERVING TRAY

• Approximately 7”x 9”
• THIS ITEM IS BLANK 
• PICTURE IS FOR SAMPLE ONLY
• Approximately 6mm thickness 
• Single-sided print 
• Material HIGH QUALITY HARDBOARD
• This product is Made in USA
• SUBLIMATE EACH PIECE ONE AT A TIME. 

Suggested Pressing Recipe

• Temperature: 375 F
• Time: 50 seconds
• Pressure: Medium
• Remove film on both sheets before pressing
• The recommended settings above may need adjustments for best results. Settings will vary depending on the heat press brand and model ink and paper and atmospheric conditions.
• Substrate should be at room temperature

Pressing Instructions:

1. Remove the film from the white side of the substrate
2. Wipe with damp cloth if necessary
3. Place transfer facedown on the white part
4. Normal press for 45 seconds, 375 F with light pressure (Time and temp may vary based on heat press)
5. Allow to cool